Ports And Connectors Specifications; Usb Ports; Nic Ports; Serial Connector - Dell W4X15 Owner's Manual

Ports and connectors specifications

USB ports

The PowerEdge R430 system supports:
• USB 2.0-compliant ports on the front panel
• USB 3.0-complaint and USB 2.0-compliant ports on the back panel
• USB 3.0-compliant internal port
The following table provides more information about the USB specifications:
Table 24. USB specifications
System Front panel
PowerEdge R430 Two 4-pin, USB 2.0-
compliant ports

NIC ports

The PowerEdge R430 system supports four 10/100/1000 Mbps Network Interface Controller (NIC) ports
on the back panel.

Serial connector

The serial connector connects a serial device to the system. The PowerEdge R430 system supports one
serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-
compliant.

VGA ports

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge
R430 system supports two 15-pin VGA ports one each on the front and back panels.

Internal Dual SD Module

The PowerEdge R430 system supports two optional flash memory card slots with an internal dual SD
module.
NOTE: One card slot is dedicated for redundancy.

Video specifications

The PowerEdge R430 system supports Matrox G200 graphics card with 16 MB capacity.
Back panel
One 9-pin, USB 3.0-
compliant port
One 4-pin, USB 2.0-
compliant port
Internal
One 9-pin, USB 3.0-
compliant port
39