Show Dot1X Users - Dell PowerConnect M6348 Cli Reference Manual

Field
EapolFramesTx
EapolStartFramesRx
EapolLogoffFramesRx
EapolRespIdFramesRx
EapolRespFramesRx
EapolReqIdFramesTx
EapolReqFramesTx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource

show dot1x users

Use the show dot1x users command in Privileged EXEC mode to display 802.1X authenticated
users for the switch.
Syntax
show dot1x users [username
username — Supplicant username (Range: 1- 160 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
550
Description
The number of EAPOL frames of any type that have been transmitted
by this Authenticator.
The number of EAPOL Start frames that have been received by this
Authenticator.
The number of EAPOL Logoff frames that have been received by this
Authenticator.
The number of EAP Resp/Id frames that have been received by this
Authenticator.
The number of valid EAP Response frames (other than Resp/Id
frames) that have been received by this Authenticator.
The number of EAP Req/Id frames that have been transmitted by this
Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that
have been transmitted by this Authenticator.
The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
The number of EAPOL frames that have been received by this
Authenticator in which the Packet Body Length field is invalid.
The protocol version number carried in the most recently received
EAPOL frame.
The source MAC address carried in the most recently received EAPOL
frame.
username
]