Dell PowerConnect M6348 Cli Reference Manual page 106

Command
show ip http
show ip https
state
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Usage Guidelines
The commands in this document are supported across the PCM6220, PCM6348, and PCM8024
switches. The following table lists the exceptions. An X in the column indicates that switch
supports the command.
Command
"IP Source Guard Commands" on page 325 are not
supported by PCM6220.
"policy-map" on page 417.
Direction can be in or out for any switch other than
PCM6220.
"service-policy" on page 418.
Direction can be in or out for any switch other than
PCM6220.
"show diffserv service interface ethernet" on page 427.
Direction can be in or out for any switch other than
PCM6220.
"show diffserv service interface port-channel" on
page 427.
Direction can be in or out for any switch other than
PCM6220.
"show policy-map interface" on page 432.
Direction can be in or out for any switch other than
PCM6220.
"show service-policy" on page 433.
Direction can be in or out for any switch other than
PCM6220.
"stack-port" on page 1122.
This command only applies to PCM6348.
106
Description
Displays the HTTP server configuration.
Displays the HTTPS server configuration.
Specifies the state or province name.
PCM6220
—
—
—
—
—
—
—
—
Mode*
PE
PE
CC
PCM6348 PCM8024
X X
X X
X X
X X
X X
X X
X X
X —