Deadtime - Dell PowerConnect M6348 Cli Reference Manual

deadtime

Use the deadtime command in Radius mode to improve Radius response times when a server is
unavailable by causing the unavailable server to be skipped.
Syntax
deadtime
deadtime
deadtime — The amount of time that the unavailable server is skipped over. (Range: 0-2000
•
minutes)
Default Configuration
The default deadtime interval is 0 minutes.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.
Example
The following example specifies a deadtime interval of 60 minutes.
console(config)#radius-server host 192.143.120.123
console(config-radius)#deadtime 60
key
Use the key command to specify the encryption key which is shared with the RADIUS server.
Use the "no" form of this command to remove the key.
Syntax
key-string
key
key-string — A string specifying the encryption key (Range: 0 - 128 characters).
•
Default Configuration
There is no key configured by default.
Command Mode
Radius mode
440