Dell PowerConnect M6348 Cli Reference Manual page 562

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines 6 as the maximum number of retries.
console(config)#arp retries 6
arp timeout
Use the arp timeout command in Global Configuration mode to configure the ARP entry
ageout time. Use the no form of the command to set the ageout time to the default.
Syntax
integer
arp timeout
no arp timeout
integer — The IP ARP entry ageout time. (Range: 15-21600 seconds)
•
Default Configuration
The default value is 1200 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines 900 seconds as the timeout.
console(config)#arp timeout 900
clear arp-cache
Use the clear arp-cache command in Privileged EXEC mode to remove all ARP entries of type
dynamic from the ARP cache.
562