show storm-control
Use the show storm-control command in Privileged EXEC mode to display the configuration of
storm control.
Syntax
show storm-control [all |
interface — Valid Ethernet port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows storm control configurations for all valid Ethernet ports. The
second example shows flow control mode status.
console#show storm-control all
Bcast
Intf
Mode
------ ------- ------- ------- ------- ------- -------
1/g1
Disable 5
1/g2
Disable 5
1/g3
Disable 5
1/g4
Disable 5
console#show storm-control
802.3x Flow Control Mode....................... Disable
258
interface
]
Bcast
Mcast
Level
Mode
Disable 5
Disable 5
Disable 5
Disable 5
Mcast
Ucast
Ucast
Level
Mode
Level
Disable 5
Disable 5
Disable 5
Disable 5