Dot1X System-Auth-Control; Dot1X Timeout Quiet-Period - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example enables periodic re-authentication of the client.
console(config)# interface ethernet 1/g16
console(config-if-1/g16)# dot1x re-authentication

dot1x system-auth-control

Use the dot1x system-auth-control command in Global Configuration mode to enable 802.1X
globally. To disable 802.1X globally, use the no form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
The default for this command is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables 802.1X globally.
console(config)# dot1x system-auth-control

dot1x timeout quiet-period

Use the dot1x timeout quiet-period command in Interface Configuration mode to set the
number of seconds that the switch remains in the quiet state following a failed authentication
exchange (for example, the client provided an invalid password). To return to the default
setting, use the no form of this command.
538