Show Interfaces Loopback - Dell PowerConnect M6348 Cli Reference Manual

interface loopback
Use the interface loopback command in Global Configuration mode to enter the Interface
Loopback configuration mode.
Syntax
interface loopback
no interface loopback
• loopback-id — Loopback identifier. (Range: 0-7)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example enters the Interface Loopback 1 configuration mode.
console(config)# interface loopback 1
console(config-if-loopback1)#

show interfaces loopback

Use the show interfaces loopback command in Privileged EXEC mode to display information
about one or all configured loopback interfaces.
Syntax
show interfaces loopback [
loopback-id — Loopback identifier. (Range: 0-7)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
712
loopback-id
loopback-id
loopback-id
]