Dell PowerConnect M6348 Cli Reference Manual page 881

console(config-if-vlan15)#ip vrrp 5 mode
ip vrrp preempt
Use the ip vrrp preempt command in Interface Configuration mode to set the preemption
mode value for the virtual router configured on a specified interface. Use the no form of the
command to disable preemption mode.
Syntax
ip vrrp vr-id preempt
vr-id
no ip vrrp preempt
vr-id — The virtual router identifier. (Range: 1-255)
•
Default Configuration
Enabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the preemption mode value for the virtual router for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip vrrp 5 preempt
ip vrrp priority
Use the ip vrrp priority command in Interface Configuration mode to set the priority value for
the virtual router configured on a specified interface. Use the no form of the command to return
the priority to the default value.
Syntax
vr-id priority
ip vrrp priority
vr-id
no ip vrrp priority
vr-id — The virtual router identifier. (Range: 1-255)
•
priority — Priority value for the interface. (Range: 1-254)
•
881