aaa accounting network default start-stop group radius
Use the aaa accounting network default start-stop group radius command to enable RADIUS
accounting on the switch. Use the "no" form of this command to disable RADIUS accounting.
Syntax
aaa accounting network default start-stop group radius
no aaa accounting network default start-stop group radius
Default Configuration
RADIUS accounting is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#aaa accounting network default start-stop group
radius
acct-port
Use the acct-port command to set the port that connects to the RADIUS accounting server.
Use the "no" form of this command to reset the port to the default.
Syntax
port
acct-port
no acct-port
port — The layer 4 port number of the accounting server (Range: 1 - 65535).
•
Default Configuration
The default value of the port number is 1813.
Command Mode
Radius (accounting) mode
438