Priority - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#primary

priority

Use the priority command in Radius mode to specify the order in which the servers are to be
used, with 0 being the highest priority.
Syntax
priority
priority
priority — Sets server priority level. (Range 0-65535)
•
Default Configuration
The default priority is 0.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.
Example
The following example specifies a priority of 10 for the designated server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#priority 10
443