Dell PowerConnect M6348 Cli Reference Manual page 321

Example
console(config)#ipv6 mld snooping querier 120
ipv6 mld snooping querier timer expiry
Use the ipv6 mld snooping querier timer expiry command to set the MLD Querier timer
expiration period. It is the time period that the switch remains in Non-Querier mode once it has
discovered that there is a Multicast Querier in the network. Use the "no" form of this command
to reset the timer expiration period to the default.
Syntax
ipv6 mld snooping querier timer expiry
ipv6 mld snooping querier timer expiry
timer — The time that the switch remains in Non-Querier mode after it has discovered that
•
there is a multicast querier in the network. (Range: 60–300 seconds)
Default Configuration
The default timer expiration period is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier timer expiry 222
show ipv6 mld snooping querier
Use the show ipv6 mld snooping querier command to display MLD Snooping Querier
information. Configured information is displayed whether or not MLD Snooping Querier is
enabled.
Syntax
show ipv6 mld snooping querier [ detail | vlan
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
•
timer
vlan-id
]
321