candidate — Causes the router to participate in the translator election process when it
•
attains border router status.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the always translator role of the area 1 NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa translator-role always
area nssa translator-stab-intv
Use the area nssa translator-stab-intv command in Router OSPFv3 Configuration mode to
configure the translator stability interval of the NSSA. The stability interval is the period of time
that an elected translator continues to perform its duties after it determines that its translator
status has been deposed by another router.
Syntax
areaid
area
nssa translator-stab-intv
areaid
no area
nssa translator-stab-intv
areaid — Valid OSPF area identifier.
•
seconds — Translator stability interval of the NSSA. (Range: 0-3600 seconds)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
seconds
801