Dell PowerConnect M6348 Cli Reference Manual page 153

User Guidelines
The default and optional list names created with the aaa authentication login command are
used with the login authentication command. Create a list by entering the aaa authentication
list-name method
login
string used to name this list. The
authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an error,
not if there is an authentication failure. To ensure that the authentication succeeds even if all
methods return an error, specify none as the final method in the command line. For example, if
none is specified as an authentication method after radius, no authentication is used if the
RADIUS server is down.
Example
The following example configures authentication login.
console(config)# aaa authentication login default radius local
enable none
aaa authorization network default radius
Use the aaa authorization network default radius command in Global Configuration mode to
enable the switch to accept VLAN assignment by the RADIUS server.
Syntax
aaa authorization network default radius
no aaa authorization network default radius
• default — Name of the authorization list
• radius — Name of the authorization method
Default Configuration
By default, the switch does not accept VLAN assignments by the RADIUS server.
Command Mode
Global Configuration mode
User Guidelines
The RADIUS server can place a port in a particular VLAN based on the result of the
authentication. VLAN assignment must be configured on the external RADIUS server.
command for a particular protocol, where
method
argument identifies the list of methods that the
list-name
is any character
153