Dell PowerConnect M6348 Cli Reference Manual page 500

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask
255.255.255.0.
console(config)#interface vlan 1
console(config-vlan)#ip address 131.108.1.27 255.255.255.0
interface range vlan
Use the interface range vlan command in Global Configuration mode to execute a command
on multiple VLANs at the same time.
Syntax
interface range vlan {
vlan-range — A list of valid VLAN IDs to add. Separate nonconsecutive VLAN IDs with a
•
comma and no spaces; use a hyphen to designate a range of IDs. (Range: 2–4093)
all — All existing static VLANs.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands used in the interface range context are executed independently on each interface in
the range. If the command returns an error on one of the interfaces, an error message is
displayed and execution continues on other interfaces.
500
vlan-range
|all}