Dell PowerConnect M6348 Cli Reference Manual page 505

show dvlan-tunnel
Use the show dvlan-tunnel command in Privileged EXEC mode to display all interfaces enabled
for Double VLAN Tunneling.
Syntax
show dvlan-tunnel
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces for Double VLAN Tunneling.
console#show dvlan-tunnel
Interfaces Enabled for DVLAN Tunneling......... 1/g1
show dvlan-tunnel interface
Use the show dvlan-tunnel interface command in Privileged EXEC mode to display detailed
information about Double VLAN Tunneling for the specified interface or all interfaces.
Syntax
show dvlan-tunnel interface {
unit/port — A valid unit and port number separated by forward slashes (/).
•
• all — Displays information for all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
unit/port
|all}
505