•
dscp
The DSCP value (Range: 0–64).
—
Default Configuration
The default DSCP value is 46.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/g1)#voice vlan 1
console(config-if-1/g1)#voice vlan dot1p 1
console(config-if-1/g1)#voice vlan none
console(config-if-1/g1)#voice vlan untagged
voice vlan data priority
This command is to either trust or not trust (untrust) the data traffic arriving on the voice
VLAN port.
Syntax
voice vlan data priority { trust | untrust }
trust
•
Trust the dot1p priority or DSCP values contained in packets arriving on the voice
—
vlan port.
•
untrust
Do not trust the dot1p priority or DSCP values contained in packets arriving on the
—
voice vlan port.
Command Mode
Interface Configuration
Default Value
trust
Example
console(config-if-1/g1)#voice vlan data priority untrust
531