Command
ip icmp echo-reply
ip icmp error-interval
ip icmp unreachables
ip icmp redirects
ipv6 icmp error-internal
ipv6 unreachables
show dos-control
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Line
Command
exec-timeout
history
history size
line
show line
speed
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Management ACL
Command
deny (management)
management access-class
management access-list
permit (management)
show management access-class
show management access-list
Description
Enables or disables the generation of ICMP Echo Reply
messages.
Limits the rate at which IPv4 ICMP error messages are sent. GC
Enables the generation of ICMP Destination Unreachable
messages.
Enables the generation of ICMP Redirect messages.
Limits the rate at which ICMPv6 error messages are sent.
Enables the generation of ICMPv6 Destination
Unreachable messages.
Displays Denial of Service configuration information.
Description
Configures the interval that the system waits for user input. LC
Enables the command history function.
Changes the command history buffer size for a particular
line.
Identifies a specific line for configuration and enters the
line configuration command mode.
Displays line parameters.
Sets the line baud rate.
Description
Defines a deny rule.
Defines which management access-list is used.
Defines a management access-list, and enters the access-list
for configuration.
Defines a permit rule.
Displays the active management access-list.
Displays management access-lists.
Mode*
GC
IC
IC
GC
IC
PE
Mode*
LC
LC
GC
UE
LC
Mode*
MA
GC
GC
MA
PE
PE
97