Dell PowerConnect M6348 Cli Reference Manual page 520

name — Name of the group. (Range: 0-32 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example assigns the name "protected" to group 1.
console(config-if-1/g1)#switchport protected 1 name protected
switchport trunk allowed vlan
Use the switchport trunk allowed vlan command in Interface Configuration mode to add
VLANs to or remove VLANs from a trunk port.
Syntax
switchport trunk allowed vlan {add
vlan-list — List of VLAN IDs to add. Separate non-consecutive VLAN IDs with a comma
• add
and no spaces. Use a hyphen to designate a range of IDs.
• remove
comma and no spaces. Use a hyphen to designate a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to add VLANs 1, 2, and 5 to 8 to the allowed list.
520
vlan-list — List of VLAN IDs to remove. Separate non-consecutive VLAN IDs with a
vlan-list vlan-list
|remove }