Dell PowerConnect M6348 Cli Reference Manual page 875
Command line interface guide
Hide thumbs
Also See for PowerConnect M6348:
- Getting started manual (208 pages) ,
- Configuration manual (158 pages) ,
- User configuration manual (1294 pages)
Table of Contents
Advertisement
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Tunnel) mode.
User Guidelines
This command has no user guidelines.
Example
The following example specifies VLAN 11 as the source transport address of the tunnel.
console(config)#interface tunnel 1
console(config-if-tunnel1)#tunnel source vlan 11
875
- Quick Links:
- Cli Reference Guide
- Introduction
- Layer 2 Commands
Hide quick links:
Advertisement
Chapters
Table of Contents
