Dell PowerConnect M6348 Cli Reference Manual page 315

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

ACL Name: STOP_HTTP
Inbound Interface(s): 1/g1
Rule Number: 1
Action......................................... deny
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
Destination L4 Port Keyword.................... 80(www/http)
Rule Number: 2
Action......................................... permit
Protocol....................................... 255(ipv6)
Source IP Address.............................. 2001:DB8::/32
The command output provides the following information:
Field
Description
Rule Number
The ordered rule number identifier defined within the IPv6 ACL.
Action
Displays the action associated with each rule. The possible values are Permit or Deny.
Match All
Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol
This displays the protocol to filter for this rule.
Source IP Address This displays the source IP address for this rule.
Source L4 Port
This field displays the source port for this rule.
Keyword
Destination IP
This displays the destination IP address for this rule.
Address
Destination L4
This field displays the destination port for this rule.
Port Keyword
IP DSCP
This field indicates the value specified for IP DSCP .
Flow Label
This field indicates the value specified for IPv6 Flow Label.
Log
Displays when you enable logging for the rule.
Assign Queue
Displays the queue identifier to which packets matching this rule are assigned.
Mirror Interface
Displays the interface to which packets matching this rule are copied.
315

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents