Username - Dell PowerConnect M6348 Cli Reference Manual

username

Use the username command in Global Configuration mode to add a new user to the local users
database. To remove a user name use the no form of this command.
Syntax
name
username
no username
name — The name of the user. (Range: 1-20 characters)
•
password — The authentication password for the user. (Range: 8-64 characters. This value can
•
be 0 [zero] if the no passwords min-length command has been executed.)
level — The user level. Level 0 can be assigned by a level 15 user to another user to suspend
•
that user's access. (Range: 0-15)
• encrypted — Encrypted password entered, copied from another switch configuration.
Default Configuration
No user name is defined.
The default privilege level is 1.
Command Mode
Global Configuration mode
User Guidelines
This command can be used to unlock a locked user account for an already existing user.
Example
The following example configures user "bob" with password "xxxyyymmmm" and user level 15.
console(config)# username bob password xxxyyymmmm level 15
162
password
password [level
name
level
] [encrypted]