Dell PowerConnect M6348 Cli Reference Manual page 297

console(config-if)#ip address 10.240.4.115 255.255.255.0
10.240.4.1
ip address vlan
Use the ip address vlan command in Global Configuration mode to set the management VLAN.
Syntax
vlanid
ip address vlan
no ip address vlan
vlanid — vlan identification. (Range 1–4093)
•
Default Configuration
The default configuration value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 5 as management VLAN.
console(config)#ip address vlan 5
ip default-gateway
Use the ip default-gateway command in Global Configuration mode to define a default gateway
(router).
Syntax
ip-address
ip default-gateway
ip-address — Valid IP address that specifies the IP address of the default gateway.
•
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
297