Dell PowerConnect M6348 Cli Reference Manual page 609

show ip igmp-proxy interface
Use the show ip igmp-proxy interface command in Privileged EXEC mode to display a detailed
list of the host interface status parameters. It displays status parameters only when IGMP Proxy
is enabled.
Syntax
show ip igmp-proxy interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example fails to display status parameters because IGMP Proxy is not enabled.
console#show ip igmp-proxy interface
Interface Index................................ vlan13
Ver Query Rcvd
-----------------------------------------------------------------
1 0
2 0
3 0
show ip igmp-proxy groups
Use the show ip igmp-proxy groups command in Privileged EXEC mode to display a table of
information about multicast groups that IGMP Proxy reported. It displays status parameters
only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Report Rcvd Report Sent
0
0
0
Leave Rcvd
0 -----
0 0
0 -----
Leave Sent
-----
0
-----
609