Name - Dell PowerConnect M6348 Cli Reference Manual

Example
The following example groups VLAN 221 till 228 and VLAN 889 to receive the same command.
console(config)#interface range vlan 221-228,889
console(config-if)#
mode dvlan-tunnel
Use the mode dvlan-tunnel command in Interface Configuration mode to enable Double
VLAN Tunneling on the specified interface. To disable Double VLAN Tunneling on the
specified interface, use the no form of this command.
Syntax
mode dvlan-tunnel
no mode dvlan-tunnel
Default Configuration
disabled
By default, Double VLAN Tunneling is .
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to enable Double VLAN Tunneling at ethernet port 1/g1.
console(config-if-1/g1)#mode dvlan-tunnel

name

Use the name command in Interface Configuration mode to add a name to a VLAN. To remove
the VLAN name, use the no form of this command.
NOTE: This command cannot be configured for a range of interfaces (range context).
Syntax
string
name
no name
string — Comment or description to help identify a specific VLAN (Range: 1–32 characters).
•
501