Dell PowerConnect M6348 Cli Reference Manual page 574

console(config-dhcp6s-pool)#no domain-name test
ipv6 dhcp pool
Use the ipv6 dhcp pool command in Global Configuration mode to enter IPv6 DHCP Pool
Configuration mode. DHCPv6 pools are used to specify information for DHCPv6 server to
distribute to DHCPv6 clients. These pools are shared between multiple interfaces over which
DHCPv6 server capabilities are configured.
Syntax
ipv6 dhcp pool
no ipv6 dhcp pool
pool-name — DHCPv6 pool name. (Range: 1-31 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters IPv6 DHCP Pool Configuration mode.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#
ipv6 dhcp relay
Use the ipv6 dhcp relay command in Interface Configuration mode to configure an interface for
DHCPv6 relay functionality.
Syntax
ipv6 dhcp relay {destination
id
}[remote-id {duid-ifid |
• destination — Keyword that sets the relay server IPv6 address.
relay-address — An IPv6 address of a DHCPv6 relay server.
•
574
pool-name
pool-name
relay-address
user-defined-string
[interface vlan vlan-id ] | interface vlan
}]
vlan-