Dell PowerConnect M6348 Cli Reference Manual page 929

no sntp authenticate
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example, after defining the authentication key for SNTP , grants authentication.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp authentication-key
Use the sntp authentication-key command in Global Configuration mode to define an
authentication key for Simple Network Time Protocol (SNTP). To remove the authentication
key for SNTP , use the no form of this command.
Syntax
sntp authentication-key
no sntp authentication-key
key-number — number (Range: 1–4294967295)
•
value — value (Range: 1-8 characters)
•
Default value
No authentication is defined.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
key-number value
md5
number
929