Clear Ipv6 Statistics - Dell PowerConnect M6348 Cli Reference Manual

clear ipv6 neighbors
Use the clear ipv6 neighbors command in Privileged EXEC mode to clear all entries in the IPv6
neighbor table or an entry on a specific interface.
Syntax
clear ipv6 neighbors [vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example clears all entries in the IPv6 neighbor table.
console(config)#clear ipv6 neighbors

clear ipv6 statistics

Use the clear ipv6 statistics command in Privileged EXEC mode to clear IPv6 statistics for all
interfaces or for a specific interface, including loopback and tunnel interfaces. IPv6 statistics
display in the output of the show ipv6 traffic command.
Syntax
clear ipv6 statistics [vlan
vlan-id — Valid VLAN ID.
•
tunnel-id — Tunnel identifier. (Range: 0-7)
•
loopback-id — Loopback identifier. (Range: 0-7)
•
Default Configuration
This command has no default configuration.
vlan-id
]
vlan-id tunnel-id
| tunnel
loopback-id
| loopback ]
665