Dell PowerConnect M6348 Cli Reference Manual page 524

Command Mode
VLAN Database Mode
User Guidelines
The dynamic VLAN (created via GRVP) should exist prior to executing this command. See the
Type column in output from the show vlan command to determine that the VLAN is dynamic.
Example
The following changes vlan 3 to a static VLAN.
console(config-vlan)#vlan makestatic 3
vlan protocol group
Use the vlan protocol group <groupid> command in Global Configuration mode to add
multiple vlan protocol groups to the system. When a protocol group is created, it is assigned a
unique group ID number. The group ID is used for both configuration and script generation to
identify the group in subsequent commands. Use the no form of the command to remove the
specified VLAN protocol group name from the system.
Syntax
vlan protocol group
no vlan protocol group
groupid — The protocol-based VLAN group ID used to create a protocol-based VLAN group.
•
(Range: 1–128 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
A Group ID is automatically generated when you create a protocol-based group with the vlan
protocol group command. To see the group ID associated with the name of a protocol group,
use the show port protocol all command.
Example
console(config)#vlan protocol group 1
524
<groupid>
<groupid>