Dell PowerConnect M6348 Cli Reference Manual page 90

Command
ip pimsm query-interval
ip pimsm register-rate-limit
ip pimsm spt-threshold
ip pimsm staticrp
ip pim-trapflags
show ip pimsm
show ip pimsm interface
show ip pimsm neighbor
show ip pimsm rphash
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Router Discovery Protocol
Command
ip irdp
ip irdp address
ip irdp holdtime
ip irdp maxadvertinterval
ip irdp minadvertinterval
ip irdp preference
show ip irdp
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
90
Description
Configures the transmission frequency of hello messages in
seconds between PIM enabled neighbors.
Sets the Register Threshold rate for the RP (Rendezvous
Point) router to switch to the shortest path.
Configures the threshold rate for the RP router to switch to
the shortest path.
Creates RP IP address for the PIM-SM router.
Enables the PIM trap mode for both Sparse Mode (SM)
and Dense Mode (DM).
Displays the system-wide information for PIM-SM.
Displays interface information for PIM-SM on the specified
interface.
Displays neighbor information for PIM-SM on the specified
interface.
Displays the RP router being selected from the set of active
RP routers.
Description
Enables Router Discovery on an interface.
Configures the address that the interface uses to send the
router discovery advertisements.
Configures the value, in seconds, of the holdtime field of
the router advertisement sent from this interface.
Configures the maximum time, in seconds, allowed
between sending router advertisements from the interface.
Configures the minimum time, in seconds, allowed
between sending router advertisements from the interface.
Configures the preference of the address as a default router
address relative to other router addresses on the same
subnet.
Displays the router discovery information for all interfaces,
or for a specified interface.
Mode*
IC
GC
GC
GC
GC
PE
PE
PE
PE
Mode*
IC
IC
IC
IC
IC
IC
PE