Ipv6 Forwarding; Ipv6 Host - Dell PowerConnect M6348 Cli Reference Manual

console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 enable

ipv6 forwarding

Use the ipv6 forwarding command in Global Configuration mode to enable IPv6 forwarding on
a router.
Syntax
ipv6 forwarding
no ipv6 forwarding
Default Configuration
Enabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example globally enables IPv6 forwarding.
console#configure
console(config)#ipv6 forwarding
console(config)#no ipv6 forwarding

ipv6 host

The ipv6 host command is used to define static host name-to- ipv6 address mapping in the host
cache.
Syntax
name ipv6-address
ipv6 host
no ipv6 host
name — Host name.
•
ipv6-address — IPv6 address of the host.
•
668
name