Dell PowerConnect M6348 Cli Reference Manual page 899

no http port
port-num — The port number to monitor (Range: 1–65535).
•
Default Configuration
Captive portal only monitors port 80 by default.
Command Mode
Captive Portal Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#http port 81
console(config-CP)#no http port
https port
Use the https port command to configure an additional HTTPS port for captive portal to
monitor. Use the "no" form of this command to remove the additional HTTPS port from
monitoring.
Syntax
https port port-num
no https port
port-num — The port number to monitor (Range: 1–65535).
•
Default Configuration
Captive portal only monitors port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#https port 1443
899