Show Ip Arp Inspection Ethernet - Dell PowerConnect M6348 Cli Reference Manual

ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08

show ip arp inspection ethernet

Use the show ip arp inspection ethernet command to display the Dynamic ARP Inspection
configuration on all the DAI enabled interfaces. Giving an interface argument, it displays the
values for that interface.
Syntax
show ip arp inspection ethernet [
interface — Valid Ethernet port. The full syntax is unit/port.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following fields are displayed for each interface:
Interface
Trust State
Rate Limit
Burst Interval
Example
console#show ip arp inspection ethernet
Interface
---------------
1/g1
1/g2
230
interface
]
The interface-id for each displayed row.
Whether interface is trusted or untrusted for DAI.
The configured rate limit value in packets per second.
The configured burst interval value in seconds.
Trust State Rate Limit
----------- ----------
Untrusted
Untrusted
Burst Interval
(pps) (seconds)
---------------
15
10
1
10