Show Dot1X Users - Dell Networking 7048 Reference Manual

Field
InvalidEapolFramesRx
EapLengthErrorFramesRx The number of EAPOL frames that have been received
LastEapolFrameVersion
LastEapolFrameSource

show dot1x users

Use the show dot1x users command in Privileged EXEC mode to display
802.1x authenticated users for the switch.
Syntax
show dot1x users [username
username — Supplicant username (Range: 1–160 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x users.
console#show dot1x users
Port Username
Description
The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
by this Authenticator in which the Packet Body Length
field is invalid.
The protocol version number carried in the most recently
received EAPOL frame.
The source MAC address carried in the most recently
received EAPOL frame.
username
]
802.1x Commands
883