Dell PowerConnect M6348 Cli Reference Manual page 353

Global Configurations:
Transmit Interval: 30 seconds
Transmit TTL Value: 120 seconds
Reinit Delay: 2 seconds
Notification Interval: limited to every 5 seconds
console#show lldp
LLDP transmit and receive disabled on all interfaces
show lldp interface
Use the show lldp interface command in Privileged EXEC mode to display the current LLDP
interface state.
Syntax
interface
show lldp interface {
interface — Specifies a valid physical interface on the switch or unit/port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the command with the all
parameter.
console#show lldp interface all
Interface Link Transmit Receive
--------- ---- -------- -------- -------- ------- ----
1/g1 Up Enabled
1/g2 Down Enabled
1/g3 Down Disabled Disabled Disabled 1,2
| all }
Notify
Enabled Enabled
Enabled Disabled
TLVs Mgmt
0,1,2,3 Y
Y
N
353