Show Ip Route Summary; Show Ip Stats; Show Ip Vlan; Ipv6 Multicast Commands - Dell PowerConnect M6348 Cli Reference Manual

Command

show ip route summary

show ip stats

show ip vlan

*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
IPv6 Multicast
Command
ipv6 pimsm (Global config)
ipv6 pimsm (VLAN Interface
config)

ipv6 pimsm bsr-border

ipv6 pimsm bsr-candidate

ipv6 pimsm dr-priority

ipv6 pimsm hello-interval

ipv6 pimsm join-prune-interval

ipv6 pimsm register-threshold

ipv6 pimsm rp-address

ipv6 pimsm rp-candidate
ipv6 pimsm spt-threshold
ipv6 pimsm ssm
show ipv6 pimsm
show ipv6 pimsm bsr
78
Description
Shows the number of all routes, including best and non-
best routes.
Displays IP statistical information
Displays the VLAN routing information for all VLANs with
routing enabled.
Description
Administratively enables PIMSM for IPv6 multicast
routing.
Administratively enables PIM-SM multicast routing mode
on a particular IPv6 router interface.
Prevents bootstrap router (BSR) messages from being sent
or received through an interface.
Configures the router to announce its candidacy as a
bootstrap router (BSR).
Sets the priority value for which a router is elected as the
designated router (DR).
Configures the PIM-SM Hello Interval for the specified
interface.
Configures the interface join/prune interval for the PIM-SM
router
Configure the Register Threshold rate for the RP router to
switch to the shortest path.
Statically configures the RP address for one or more
multicast groups.
Configures the router to advertise itself as a PIM candidate
rendezvous point (RP) to the bootstrap router (BSR).
Configures the Data Threshold rate for the lasthop router
to switch to the shortest path.
Defines the Source Specific Multicast (SSM) range of
multicast addresses.
Displays global status of IPv6 PIMSM and its IPv6 routing
interfaces.
Displays the bootstrap router (BSR) information.
Mode*
PE
UE
PE
Mode*
GC
IC
IC
GC
IC
IC
IC
GC
GC
GC
GC
GC
PE
PE