Snmp-Server Group - Dell PowerConnect M6348 Cli Reference Manual

Syntax
snmp-server filter
no snmp-server filter
filter-name — Specifies the label for the filter record that is being updated or created. The
•
name is used to reference the record. (Range: 1-30 characters.)
oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded
•
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example, 1.3.*.4.
included — Indicates that the filter type is included.
•
• excluded — Indicates that the filter type is excluded.
Default Configuration
No filter entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same filter record. Later lines take
precedence when an object identifier is included in two or more lines.
Examples
The following example creates a filter that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group.
console(config)# snmp-server filter user-filter system included
console(config)# snmp-server filter user-filter system.7 excluded
console(config)# snmp-server filter user-filter ifEntry.*.1
included

snmp-server group

Use the snmp-server group command in Global Configuration mode to configure a new Simple
Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To
remove a specified SNMP group, use the no form of this command.
1052
filter-name oid-tree
{included | excluded}
filter-name oid-tree
[ ]