Speed; Port Channel Commands; Interface Port-Channel; Interface Range Port-Channel - Dell PowerConnect M6348 Cli Reference Manual

Command

speed

For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Port Channel
Command
channel-group

interface port-channel

interface range port-channel

hashing-mode
no hashing-mode
show interfaces port-channel
show statistics port-channel
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.

Port Monitor

Command
monitor session
show monitor session
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
QoS
Command
assign-queue
class
Description
Configures the speed of all member ports in the aggregator
group/zone.
Description
Associates a port with a port-channel.
Enters the interface configuration mode of a specific
port-channel.
Enters the interface configuration mode to configure
multiple port-channels.
Sets the hashing algorithm on trunk ports.
Sets the hashing algorithm on trunk ports to default (3). IC (port-
Displays port-channel information.
Displays port-channel statistics.
Description
Configures a port monitoring session.
Displays the port monitoring status.
Description
Modifies the queue ID to which the associated traffic
stream is assigned.
Creates an instance of a class definition within the specified
policy for the purpose of defining treatment of the traffic
class through subsequent policy attribute statements.
Mode*
PA
Mode*
IC
GC
GC
IC (port-
channel)
channel)
PE
PE
Mode*
GC
PE
Mode*
PCMC
PMC
63