Show Ipv6 Ospf - Dell PowerConnect M6348 Cli Reference Manual

Example
The following example sets a 4-digit dotted-decimal number identifying the Router OSPF ID as
2.3.4.5.
console(config)#ipv6 router ospf
console(config-rtr)#router-id 2.3.4.5

show ipv6 ospf

Use the show ipv6 ospf command in Privileged EXEC mode to display information relevant to
the OSPF router.
Syntax
show ipv6 ospf
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example enables OSPF traps.
console#show ipv6 ospf
Router ID...................................... 0.0.0.2
OSPF Admin Mode................................ Enable
ASBR Mode...................................... Disable
ABR Status..................................... Disable
Exit Overflow Interval......................... 0
External LSA Count............................. 0
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
823