Dos-Control L4Port - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example activates the Maximum ICMP Packet Denial of Service protection with
a maximum packet size of 1023.
console(config)#dos-control icmp 1023

dos-control l4port

Use the dos-control l4port command in Global Configuration mode to enable L4 Port Denial of
Service protection. If the mode is enabled, Denial of Service prevention is active for this type of
attack. If packets ingress having Source TCP/UDP Port Number equal to Destination TCP/UDP
Port Number, the packets are dropped.
Syntax
dos-control l4port
no dos-control l4port
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example activates L4 Port Denial of Service protection.
console(config)#dos-control l4port
957