IP Source Guard Commands
IP Source Guard commands are supported by PCM6348 and PCM8024.
This chapter explains the following commands:
•
ip verify source
•
ip verify source port-security
•
ip verify binding
•
show ip verify interface
•
show ip verify source interface
•
show ip source binding
ip verify source
Use the ip verify source command in Interface Configuration mode to enable filtering of IP
packets matching the source IP address.
Syntax
ip verify source
Default Configuration
By default, IPSG is disabled on all interfaces.
Command Mode
Interface Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/g1)#ip verify source
19
325