Show Rmon History - Dell PowerConnect M6348 Cli Reference Manual

The following table describes the significant fields shown in the display:
Field
Index
Description
Type
Community
Owner
Last time sent

show rmon history

Use the show rmon history command in User EXEC mode to display RMON Ethernet Statistics
history. Also see the rmon history command.
Syntax
show rmon history
index — The requested set of samples. (Range: 1–65535)
•
• throughput — Displays throughput counters.
• errors — Displays error counters.
• other — Displays drop and collision counters.
• period
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
1000
Description
An index that uniquely identifies the event.
A comment describing this event.
The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in the
log table for each event. In the case of trap, an SNMP trap is sent to one or more
management stations.
If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
The entity that configured this event.
The time this entry last generated an event. If this entry has not generated any
events, this value is zero.
index
[throughput | errors | other] [period
seconds — Specifies the requested period time to display. (Range: 0–2147483647)
seconds
]