Dell PowerConnect M6348 Cli Reference Manual page 164

access-list
Use the access-list command in Global Configuration mode to create an Access Control List
(ACL) that is identified by the parameter
Syntax
std-list-num
access-list
interface
[redirect
ext-list-num
access-list
srcip srcmask
{
portvalue]] [precedence
id
] [redirect
no access-list
list-name — Access-list name up to 31 characters in length.
•
• deny | permit — Specifies whether the IP ACL rule permits or denies an action.
• every — Allows all protocols.
• eq — Equal. Refers to the Layer 4 port number being used as match criteria. The first
reference is source match criteria, the second is destination match criteria.
number — Standard protocol number. Protocol keywords icmp,igmp,ip,tcp,udp.
•
srcip — Source IP address.
•
srcmask — Source IP mask.
•
dstip — Destination IP address.
•
dstmask — Destination IP mask.
•
portvalue — The source layer 4 port match condition for the ACL rule is specified by the port
•
value parameter (Range: 0–65535).
portkey — Or you can specify the portkey , which can be one of the following keywords:
•
domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, and www.
• log — Specifies that this rule is to be logged.
• assign-queue
matches the rule. (Range: 0-6)
• mirror
interface.
redirect
•
the specified unit/port.
Default Configuration
This command has no default configuration.
164
{deny | permit} {
interface
| mirror
{deny | permit} {every | {[icmp | igmp | ip | tcp | udp | number]
portkey
| any} [eq [
precedence
interface interface
| mirror
list-name
queue-id — Specifies the particular hardware queue for handling traffic that
interface — Allows the traffic matching this rule to be copied to the specified
interface — This parameter allows the traffic matching this rule to be forwarded to
list-name
.
srcip srcmask
| every} [log] [assign-queue
]
portvalue dstmask
| ]] {dstip
tos tosmask
| tos | dscp
]}}
queue-id
| any} [eq [portkey |
dscp
] [log] [assign-queue
]
queue-