Show Copper-Ports Tdr - Dell PowerConnect M6348 Cli Reference Manual

show copper-ports cable-length
Use the show copper-ports cable-length command in Privileged EXEC mode to display the
estimated copper cable length attached to a port.
Syntax
show copper-ports cable-length [
interface — A valid Ethernet port. The full syntax is unit / port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working in a 100M or 1000M mode.
NOTE: This command is supported on
Example
The following example displays the estimated copper cable length attached to all ports.
console#show copper-ports cable-length
Port
----
1/g1
1/g2
1/g3
1/g4 Fiber

show copper-ports tdr

Use the show copper-ports tdr command in Privileged EXEC mode to display the last Time
Domain Reflectometry (TDR) tests on specified ports.
Syntax
show copper-ports tdr [
986
interface
Length [meters]
---------------
<50
Copper not active
110-140
interface
]
]
PCM8024 10G BaseT ports.