Spanning-Tree Port-Priority - Dell PowerConnect M6348 Cli Reference Manual

spanning-tree port-priority

Use the spanning-tree port-priority command in Interface Configuration mode to configure
port priority. To reset the default port priority, use the no form of this command.
Syntax
spanning-tree port-priority
no spanning-tree port-priority
priority — The port priority. (Range: 0–240)
•
Default Configuration
The default port-priority for IEEE STP is 128.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
The priority value must be a multiple of 16.
Example
The following example configures the spanning priority on 1/g5 to 96.
console(config)#interface ethernet 1/g5
console(config-if-1/g5)#spanning-tree port-priority 96
spanning-tree priority
Use the spanning-tree priority command in Global Configuration mode to configure the
spanning-tree priority. The priority value is used to determine which bridge is elected as the root
bridge. To reset the default spanning-tree priority use the no form of this command.
Syntax
spanning-tree priority
no spanning-tree priority
priority — Priority of the bridge. (Range: 0–61440)
•
Default Configuration
The default bridge priority for IEEE STP is 32768.
486
priority
priority