Ip Dvmrp Metric - Dell PowerConnect M6348 Cli Reference Manual

ip dvmrp
Use the ip dvmrp command to set the administrative mode of DVMRP in the router to active.
IGMP must be enabled before DVMRP can be enabled.
Syntax
ip dvmrp
no ip dvmrp
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 15's administrative mode of DVMRP to active.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp

ip dvmrp metric

Use the ip dvmrp metric command in Interface Configuration mode to configure the metric for
an interface. This value is used in the DVMRP messages as the cost to reach this network.
Syntax
metric
ip dvmrp metric
no ip dvmrp metric
metric — Cost to reach the network. (Range: 1-31)
•
Default Configuration
1 the default value.
586