Snmp-Server Community-Group - Dell PowerConnect M6348 Cli Reference Manual

• An internal security name is generated.
• The internal security name for SNMPv1 and SNMPv2 security models is mapped to an
internal group name.
• The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view
name. If ro is specified, then read-view and notify-view are mapped. If rw is specified, then
read-view, notify-view, and write-view are mapped.
Example
The following example configures community access string public to permit administrative
access to SNMP at an administrative station with IP address 192.168.1.20.
console(config)# snmp-server community public su ipaddress
192.168.1.20

snmp-server community-group

Use the snmp-server community-group command in Global Configuration mode to map the
internal security name for SNMP v1 and SNMP v2 security models to the group name. To
remove the specified community string, use the no form of this command.
Syntax
snmp-server community-group
community-string — Community string that acts like a password and permits access to the
•
. (Range: 1-20 characters)
SNMP protocol
group-name — Name of a previously defined group. The group defines the objects available
•
to the community. (Range: 1-30 characters)
• ip-address — Management station IP address. Default is all IP addresses.
Default Configuration
No community group is defined.
Command Mode
Global Configuration mode
User Guidelines
group-name
The parameter can be used to restrict the access rights of a community string.
When it is specified, the software:
• Generates an internal security-name.
community string group-name
-
ip-address
[ipaddress ]
1047