Show Ip Ospf; Show Ip Ospf Abr; Show Ip Ospf Area; Show Ip Ospf Asbr - Dell PowerConnect M6348 Cli Reference Manual

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

Command
ip ospf authentication
ip ospf cost
ip ospf dead-interval
ip ospf hello-interval
ip ospf mtu-ignore
ip ospf network
ip ospf priority
ip ospf retransmit-interval
ip ospf transmit-delay
maximum-paths
network area
passive-interface
passive-interface default
passive-interface (router mode)
redistribute
router-id
router ospf

show ip ospf

show ip ospf abr

show ip ospf area

show ip ospf asbr

show ip ospf database

Description
Sets the OSPF Authentication Type and Key for the
specified interface.
Configures the cost on an OSPF interface.
Sets the OSPF dead interval for the specified interface.
Sets the OSPF hello interval for the specified interface.
Disables OSPF maximum transmission unit (MTU)
mismatch detection.
Configure OSPF to treat an interface as a point-to-point
rather than broadcast interface.
Sets the OSPF priority for the specified router interface.
Sets the OSPF retransmit Interval for the specified
interface.
Sets the OSPF Transit Delay for the specified interface.
Sets the number of paths that OSPF can report for a given
destination.
Enables OSPFv2 on an interface and sets its area ID if the
IP address of an interface is covered by this network
command.
Sets the interface or tunnel as passive.
Enables the global passive mode by default for all
interfaces.
Sets the interface or tunnel as passive.
Configures OSPF protocol to allow redistribution of routes
from the specified source protocol/routers.
Sets a 4-digit dotted-decimal number uniquely identifying
the router OSPF ID.
Enters Router OSPF mode.
Displays information relevant to the OSPF router.
Displays the internal OSPF routing table entries to Area
Border Routers (ABR).
Displays information about the identified OSPF area.
Displays the internal OSPF routing table entries to
Autonomous System Boundary Routes (ASBR).
Displays information about the link state database when
OSPF is enabled.
Mode*
IC
IC
IC
IC
IC
IC
IC
IC
IC
ROSPF
ROSPF
IC
ROSPF
ROSPF
ROSPF
ROSPF
GC
PE
PE
PE
PE
PE
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents