Match Srcl4Port; Match Vlan - Dell PowerConnect M6348 Cli Reference Manual

match srcl4port

Use the match srcl4port command in Class-Map Configuration mode to add to the specified
class definition a match condition based on the source layer 4 port of a packet using a single
keyword or a numeric notation.
Syntax
match srcl4port {
portkey — Specifies one of the supported port name keywords. A match condition is specified
•
by one layer 4 port number. The currently supported values are: domain, echo, ftp, ftpdata,
http, smtp,snmp, telnet, tftp, and www.
port-number — Specifies a layer 4 port number (Range: 0–65535).
•
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a match condition using the "snmp" port name
keyword.
console(config-classmap)#match srcl4port snmp

match vlan

Use the match vlan command in Class-Map Configuration mode to add to the specified class
definition a match condition based on the value of the layer 2 VLAN Identifier field. This field
is the only tag in a single tagged packet or the first or outer tag of a double VLAN packet.
Syntax
match vlan <
vlan-id — Specifies a VLAN ID as an integer. (Range: 0–4095)
•
Default Configuration
This command has no default configuration.
414
portkey port-number
|
vlan-id
>
}