Dell PowerConnect M6348 Cli Reference Manual page 96

Command
clear config
copy
delete backup-image
delete backup-config
delete startup-config
filedescr
script apply
script delete
script list
script show
script validate
show backup-config
show bootvar
show dir
show running-config
show startup-config
update bootcode
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Denial of Service
Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
dos-control tcpfrag
96
Description
Restores switch to default configuration
Copies files from a source to a destination.
Deletes a file from a flash memory.
Deletes the backup configuration file
Deletes the startup configuration file.
Adds a description to a file.
Applies commands in the script to the switch.
Deletes a specific script.
Lists all scripts present in the switch.
Displays the contents of a script file.
Validates a script file.
Displays contents of a backup configuration file
Displays the active system image file that the switch loads
at startup.
Lists all the files available on the flash file system.
Displays the contents of the currently running
configuration file.
Displays the startup configuration file contents.
Updates the bootcode on one or more switches.
Description
Enables Minimum TCP Header Size Denial of Service
protection.
Enables Maximum ICMP Packet Size Denial of Service
protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP Address (SIP=
DIP) Denial of Service protection.
Enables TCP Flag Denial of Service protections.
Enables TCP Fragment Denial of Service protection.
Mode*
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
UE
PE
PE
PE
PE
Mode*
GC
GC
GC
GC
GC
GC